Card Design Options and Requirements

Card Design Options and Requirements

There are two options for the card design for your store. Please specify to your dealer the option that you prefer and provide the dealer with the necessary files and text/wording

Option 1: Store artwork/logo with text

Front-side
We can apply your store's artwork or logo along with text/wording (such as address/phone/url) underneath the logo.   

For example:


If you don't have a logo, we can simply write your store name using a large, catchy font.

Back-side:
The back-side uses standard wording in English and Spanish along with a disclaimer with your store's name on the bottom. 


Option 2: Completely custom

You can completely customize both the front and back-side if you wish. But in this case, you will need to provide a final design files that meet the following specification:

  1. The card size is 85.6mm x 54mm (3.375" by 2.125"). Your design must have these dimensions plus bleeds of at least 1/8th inch on each edge.
  2. File format: psd, eps, ai, or pdf
  3. Resolution must be at least 400 dpi.
  4. Color mode must be set to CMYK or Pantone.
  5. Borders must be at least 1/4th inch.
  6. Fonts must be outlined.


    • Related Articles

    • The Card Tracker

      This article discusses the different functions of the Laundro Portal's Card Tracker Searching For A Card: Clicking on Card Tracker will bring you to the Card Tracker page where you are able to see information associated with a specific laundry card, ...

    • Card Report

      This feature allows you to find all Laundry Cards, or Mobile Accounts, associated with your location, that are currently active. You'll find this report in the last line of the Reports tab, on the right hand side of the Portal as shown below, circled ...

    • Card Dispenser Issues - SyncoTek

      This article covers troubleshooting the SyncoTek brand of card dispensers. They are black in color and is shown in the picture below: If your card dispenser is silver in colour, you most likely have an Asahi-Seiko card dispenser (shown below): For ...

    • Replacing Card Reader Boards

      For malfunctioning readers, you'll be replacing only the circuit board inside the reader's enclosure. There are generally two stages to this: Stage 1: - Installing the replacement reader board into the reader enclosure - Numbering the new reader ...

    • Card Dispenser Issues - Asahi-Seiko

      This article covers troubleshooting the Asahi-Seiko card dispenser (standard and large capacity models) If your card dispenser is black in color, you most likely have a SyncoTek card dispenser (shown below): For issues specific to the SyncoTek brand ...