Change of Ownership

Change of Ownership

If you are selling the business with the Laundroworks system, please complete the Laundroworks Change of Ownership form.
Either the Seller, or the Buyer, can complete this form; but it is important that ALL information is accurate, and the form is submitted only once.

Once submitted, both the buyer and seller will receive a copy of the submission via email, and the Laundroworks team can begin the transition process.

If you have any questions, or need to update any of the information on a change of ownership form that has already been submitted, please do not hesitate to contact us directly 888-629-8620 X2

    • Related Articles

    • Deducting Value / Changing the Balance of a Laundry Card

      On Value Adding Centers (VACs) equipped with a touch screen, you can use a Management Card to access the Change Balance operation directly at the VAC Kiosk. You can use the Change Balance feature to adjust the balance of a user's Laundry Card. Note: ...

    • Electrolux: Compass Pro dryers

      Electrolux Compass Pro Dryer This installation covers Electrolux Compass Pro Single and Stack Dryers. Parts Reader with a Generic Relay board inside For stack dryers, the readers have back-plates that differ between the left and right versions: For ...

    • Dexter A-series washers

      This article covers installation of readers on Dexter A-series washers (WCAD or WVCD models). The readers use pulse control. This guide is for the current production reader kits for Dexter A-series. These readers use the Generic Relay (ASSY-02-02-11) ...

    • Free Dry Promotion

      Overview With the Free Dry promotion, you're enabling a secondary balance on all laundry cards, called the Free Dry Balance. When a customer starts a particular washer, that washer's reader adds value to the laundry card's Free Dry Balance. Funds ...

    • Wascomat/Electrolux Selecta II dryers

      This article covers installation of readers on Wascomat or Electrolux dryers with Selecta II controls. The readers for these machines use PULSE control (Coin Drop emulation). Required parts Card Reader Kit (model CR-11-130-04 for stacks, CR-11-230-04 ...