Dexter
Dexter A-series washers
This article covers installation of readers on Dexter A-series washers (WCAD or WVCD models). The readers use pulse control. This guide is for the current production reader kits for Dexter A-series. These readers use the Generic Relay (ASSY-02-02-11) ...
Dexter: N-series (WCN models)
This installation article covers WCN Dexter washers. Parts Reader (with Generic Relay board) Cable harness 12V power supply High voltage sensor (optional) Installation Before proceeding, you should assign numbers to each of the machines in the ...
Dexter: Pulse dryers
This note covers reader installations on older Dexter coin-op dryers such as DDAD, DL2X, DDAB, DLC. The reader uses pulse control to send a single pulse to the dryer control using the coin-drop interface (connector P2). Only one reader per stack is ...
Dexter: C-series (washers and dryers)
This article covers installation of readers on Dexter C-series washers and dryers. The readers use serial communication and support advanced features like multi-vend pricing, full-cycle dryer pricing, Plus Cycle (e.g Prewash, Supercycle). Required ...