Wascomat / Electrolux
Gen4 washers
This installation note covers the old Gen4 washers, such as W184. These washers use mechanical timers. The reader kit comes with a High Voltage Relay to control this timer. The reader is powered by a separate AC-DC power supply adapter (provided with ...
Emerald Controls
This article covers installation of readers on Wascomat washers with Emerald controls (like E620 SU655E). The readers use pulse control Required parts Reader (model CR-11-118-04. The board inside the reader must be "Generic Relay") Cable harness 12V ...
Wascomat: Encore Dryers
This installation covers Wascomat Encore Dryers. The reader uses Pulse control. The cable harness and connection is identical to Encore washers. Parts Reader Cable harness Installation Do not mix up readers for washers and readers for dryers. They ...
Wascomat: Crossover Dryer
This installation covers Wascomat Crossover Dryer (Crossover dryers use the same control as ADC Phase 5 dryers). The reader for these dryers use a basic pulse interface to add dry time when the card is presented. Parts Reader Backplate Cable harness ...
Wascomat: Encore/Crossover Washer
This installation covers Wascomat Encore and Crossover washers. The reader uses serial communication to communicate with the machine. Both card-ready and coin models are covered. Parts Reader Cable harness Installation Before proceeding, you should ...
Wascomat: Gen5 and Gen6 washers
This installation note covers the old Gen5 and Gen6 washers. These are non-electronic, high voltage machines. The reader kit comes with a High Voltage Relay to control this timer. The reader is powered by a separate AC-DC power supply adapter ...
Electrolux: Compass Pro dryers
Electrolux Compass Pro Dryer This installation covers Electrolux Compass Pro Single and Stack Dryers. Parts Reader For stack dryers, the readers have back-plates that differ between the left and right versions: For single dryers, the readers use a ...
Electrolux: Compass and Clarus Control washers
This installation article covers Wascomat/Electrolux washers with Compass and Compass Pro controls (the ones with the knob) and the Clarus vibe controls The reader uses serial communication to control the machine, including vend pricing. Parts Reader ...
Wascomat/Electrolux Selecta II dryers
This article covers installation of readers on Wascomat or Electrolux dryers with Selecta II controls. The readers use pulse control. Required parts Reader (model CR-11-130-04 for stacks, CR-11-230-04 for singles) Cable harness Power supply (in some ...