Alliance
EDC Washers (SCxxEC)
This article covers old EDC control Alliance washers. Typical model numbers are SCxxEC (where xx is the size). Parts required Reader (with Generic Relay board) 12V power supply adapter Cable harness (02-06-92) Installation Before proceeding, you ...
Alliance: Netmaster Dryers
This article covers Alliance Netmaster dryers. Parts Reader (Generic Serial board ASSY-02-02-10) Cable harness Installation Before proceeding, you should assign numbers to each of the machines in the laundry room/building. It is highly recommended ...
Alliance: V-computer washers (SCxxVC)
This article covers installation of readers on Alliance washers (Speed-Queen, Huebsch) with the V-computer controls. These typically have model numbers SCxxVCVQU1 Required parts Reader (model CR-11-117-22. The board should be ASSY-02-02-11 (Generic ...
Speed-Queen SCxxAC washers (B-micro with A controls)
This installation covers Speed-Queen/Huebsch washers with B-micro with "A" controls. The model number of these machines is SCxxAC or HCxxAC. The reader uses a single pulse control to start the machine. Parts Reader Cable harness Power supply adapter ...
Alliance: Quantum/Galaxy Touch
This installation note covers Alliance's touch washers and dryers (Quantum Touch for Speed-Queen, Galaxy Touch for Huebsch). The reader uses serial communication with these machines. Currently, vend price configuration is done through the machine's ...
Alliance: EDC and DX4 Dryers
This installation covers Alliance dryers with EDC or DX4 controls. These are older, pulse-based dryers. Common model numbers include JT0300, ST0300, HTT30NEC. Parts Reader (with Generic Relay board) Cable harness 12V power supply (for DX4 and EDC ...
Alliance: Netmaster washer (SCxxN)
This installation covers Speed-Queen/Huebsch washers with Netmaster controls. The reader uses Pulse control through a designated pulse interface on the machine's control. (Shown above is a card-ready version with an ESD reader - just for reference) ...
Alliance: B-micro (SCxxB)
Speed-Queen SCxxB washers (B-micro) This installation covers Speed-Queen/Huebsch washers with B-micro controls. Parts Reader Cable harness Power supply adapter for the reader Installation Before proceeding, you should assign numbers to each of the ...
Alliance: Mechanical (SCxxMY)
Speed-Queen/Huebsch SCxxMY/HCxxMY washers This installation covers Speed-Queen/Huebsch washers with Mechanical controls (without a digital coin board). A high voltage relay is used to control the mechanical timer of the machine. Parts Reader Cable ...
Alliance: Mechanical (SCxxMD2)
This article covers installation of readers on Alliance washers (Speed-Queen, Huebsch) with mechanical controls that are are accompanied by a power board. These typically have model numbers SCxxMD2 or HCxxMD2, where xx is the machine's capacity. ...
Alliance - Serial Controls (Non-touch controls)
This article covers installation and troubleshooting of readers for Alliance equipment (Speed-Queen, Huebsch) with serial controls, which includes most modern Alliance equipment. The content covers both small-chassis machines and large multi-load ...